Welcome: Liangshan Yue Tong Special Automobile Manufacturing Co., Ltd.
            Language: Chinese ∷  English

            News

            Analysis of the design principle of the structure of the trailer truck girder

            The semitrailer beam is the main part of the semitrailer, and there are many longitudinal beams near the girder. The girders and auxiliary girders form the whole freight transport platform for the semi-trailer.
            The beam consists of the upper and lower wing plates and the web.
            The influence of girder strength is nothing more than the dimension of longitudinal beam section, but the influence degree of each dimension on longitudinal beam strength is different.

            Basic dimensions: upper and lower wing width W=146mm, upper and lower wing plate thickness t1=t2=10mm, web t=5mm, girders height H=500mm
            The strength of the web has a relatively small influence on the strength of the longitudinal beam. The web of 5mm's web is about 4.4% higher than that of the 4mm, but the normal web will not be too thin, because the high section plate will be flexed under the load and will be waved or side drums.
            The strength of the upper wing plate 10mm is about 8% higher than that of 8mm. The cross section height of H has great influence on the strength of the beam. The strength of 500mm is about 14% higher than that of 450mm, and the anti deformation strength is about 27%; 450mm is about 16% higher than that of 400mm, and the anti deformation strength is about 30%; 400mm is about 18% higher than that of 350mm, and the anti deformation strength is about 35% high. We can see that the effect of each 50mm on the strength is increasing as the total height H decreases.
            The following is a schematic diagram of the stress distribution of the longitudinal beam. The stress concentration area of the longitudinal beam is the gooseneck part, that is, the low strength and easy deformation position.  Therefore, the location of longitudinal girders and gooseneck is also a common reinforcing part.



            It is said that the increase of the thickness of the web has little influence on the strength of the longitudinal beam, but the double web can effectively strengthen the torsion strength. In general, the double web will be used in the dump truck and the low flat gooseneck to increase the torsion resistance of the complex road conditions.
            The strengthening of the lower wing plate is more effective to increase the bending strength and deformation resistance, because the lower wing reinforcement increases the thickness of the lower wing plate and increases the total height of the longitudinal beam.
            Steel has the characteristics of compression and non tension, so many times the upper wing of the longitudinal beam will be thinner than the lower wing plate.
            In addition: if the semi-trailer beam is not used in the manufacture and selection of materials, there will be broken beams and other traffic accidents. The characteristics of the beam are determined by the characteristics of the steel.
            Common steel bar for trailer girder
            Name
            Common trailer beam steel
            Name: general steel material manganese steel material high strength steel material special steel material
            Model
            Q235
            Q345
            T700
            Select material according to the required
            Yield strength
            235Mpa
            345Mpa
            700Mpa
            elongation
            26%
            22%
            17%
            Through comparison, it can be seen that the Q235 has to increase the thickness of steel to ensure the strength of the steel because of its low yield strength. It is mainly used in traditional large trailers and often back and forth transportation vehicles with bad road conditions. The performance of Q345 is comparatively moderate, it is suitable for general general model, the strength is slightly higher, and the weight of a part of the trailer can be reduced. The toughness can also ensure that the trailer can adapt to the general comprehensive road condition, and it is widely used. T700 has high strength and good welding performance, but it is strict in welding process. It can reduce the weight of the trailer to the maximum under the condition of guaranteeing the bearing strength. It is widely used in the lightweight dump truck frame and the girder abdomen.
            Scavenging two dimensional code to share more information

            CATEGORIES

            CONTACT US

            Contact: Yang Zunkai

            Phone: 15694444446

            Tel: 0537-7766007

            Email: yuetongqc@126.com

            Add: Quanpu Industrial Park, Liangshan District, Jining City, Shandong Province

            Scan the qr codeClose
            the qr code
            欧美videos粗暴,女人与善牲交SPECIAL,日本乱理伦片在线观看真人,亚洲人成电影网站在线观看天天影院,免费看电影的网站,韩国三级片电影在线观看,优酷56电影网_2020真实自拍愉拍在线看,午夜男欢女爱免费视频,女女互摸吃奶互慰视频,亚洲欧美综合精品二区黄色电影免费片日本大片 - 视频 - 在线观看 - 影视资讯 - 品尚网